 |
| HYTORC CLAMP NUT |
|
PERFECT TORSION-FREE BOLTING
The Clamp™ is a reusable, site-suitable, three-piece tensioning system. It is safe and perfect for applications which are time-critical. The Clamp™ replaces the nut and stays on the application.
The hydraulic or pneumatic torque tool reacts off the CLAMP™ and tensions the bolt in seconds, torsion-free, side load-free and reaction are-free, with a bolt-load accuracy of +5%. During tightening the bolt doesn’t turn. A single technician can tighten the application with multiple tools simultaneously.
Reaction arms and back-up wrenches are no longer needed. With the Clamp™ the tool’s lifetime increases. The bolting process, standard or inverted, is controlled remotely, and the technician no longer needs to hold the tool.
|
 |
| HYTORC LoaDISC |
|
ACCURATE TENSIONING, AS BRILLIANT AS IT IS SIMPLE
The LoaDISC™ is a reaction-washer with an inner thread segment that is placed underneath a standard nut.
The HYTORC® hydraulic or pneumatic torque tool reacts off the LoaDISC™, and tensions the bolt in seconds with a bolt-load accuracy of +10%. During tightening, the bolt doesn’t turn. A single technician can tighten the application with multiple tools simultaneously. The bearing face of the LoaDISC™ suffers no damage, as no turning force on the bearing-face takes place.
Reaction arms and back-up wrenches are no longer needed. With the LoaDISC™, the tool’s lifetime increases. The bolting process, standard or inverted, is controlled remotely, and the technician no longer needs to hold the tool.
|
|